Science skills

Significant figuresHow to count them, and how many to give in an answer

The number of digits in a measurement says how precisely it was measured. Writing 5.0 g and 5.000 g tells a reader two different things. Getting significant figures right shows you understand your data, and it stops a calculator answer from claiming more than the measurements can support.

  • Years 9 to 12
  • Chemistry, Physics, Biology
  • Updated November 2026

The short answer

Counting

Start at the first non-zero digit.

Leading zeros never count. Zeros between or after other digits (after a decimal point) do.

× and ÷

Use the fewest significant figures.

Match the least precise value you multiplied or divided by.

+ and −

Use the fewest decimal places.

Match the value with the fewest digits after the decimal point.

What significant figures tell you

A mass written as 5.04 g was measured to about the nearest 0.01 g. Written as 5.0442 g, it was measured to about the nearest 0.0001 g, on a much better balance. The extra digits are information, not decoration.

So a final answer should only have as many digits as your measurements can justify. If a calculator shows 0.153422 but your data only supports two significant figures, the answer is 0.15.

How to count them

RuleExampleSignificant figures
Non-zero digits always count4.323
Zeros between non-zero digits count20064
Leading zeros never count0.00542
Zeros at the end, after a decimal point, count0.05003
Zeros at the end of a whole number are unclear15002, 3 or 4
Scientific notation removes the doubt1.5 × 10³ or 1.500 × 10³2 or 4
Exact numbers have no limitthe 2 in 2πr, or 6 counted beakersnot counted

Practice: how many significant figures?

  1. 0.0072

  2. 4.50

  3. 3008

  4. 0.100

  5. 6.02 × 10²³

  6. 0.5

  7. 70.0

  8. 1.230

Significant figures in calculations

Multiplying and dividing: the answer has the same number of significant figures as the least precise value used.

3.742 × 0.041 = 0.15  (not 0.153422, because 0.041 has only 2 significant figures)

Adding and subtracting: the answer has the same number of decimal places as the least precise value.

14.632 g + 5 g = 20 g     4.1 cm − 3.817 cm = 0.3 cm

Glassware in chemistry

Volumes measured with a pipette, burette or volumetric flask are more precise than the way they are often written. A “25 mL pipette” delivers 25.0 mL to about ± 0.1 mL. Treat pipette and volumetric flask volumes as having at least three significant figures, even if fewer are written.

Worked example: making a standard solution

Chemistry, Year 11

4.63 g of sodium chloride (molar mass 58.44 g/mol) is dissolved and made up to 250.0 mL in a volumetric flask.

Moles
n = m ÷ M = 4.63 ÷ 58.44 = 0.079226… mol. Keep all the digits for now.
Concentration
c = n ÷ V = 0.079226 ÷ 0.2500 = 0.316906… mol/L
Rounding
The least precise value is 4.63 g (3 significant figures), so c = 0.317 mol/L.
Revise the topic: Year 11 Chemistry: Introduction to quantitative chemistry

Common mistakes

Copying every digit from the calculator.

Instead: Round the final answer to match the least precise data.

Counting leading zeros.

Instead: 0.0054 has 2 significant figures, not 5.

Dropping zeros at the end of a measurement.

Instead: Write 25.0 mL if that is how precisely it was measured.

Rounding after every step.

Instead: Keep full calculator values and round once at the end.

Using significant figures for adding and subtracting.

Instead: Use decimal places instead.

Exam-style questions

  1. State the number of significant figures in 0.04060. 1 mark

    Show a model answer

    4. The leading zeros don’t count; the 4, the 0 between 4 and 6, the 6 and the final 0 all do.

  2. A car travels 125 m in 9.8 s. Calculate its average speed to an appropriate number of significant figures. 2 marks

    Show a model answer

    v = 125 ÷ 9.8 = 12.755… m/s. 9.8 has only 2 significant figures, so v = 13 m/s.

  3. A 10 mL pipette is used to transfer 0.05542 mol/L sodium hydroxide. Calculate the number of moles transferred. 2 marks

    Show a model answer

    The pipette volume is 10.0 mL (3 significant figures). n = c × V = 0.05542 × 0.0100 = 5.54 × 10⁻⁴ mol, to 3 significant figures.

  4. Explain why a mass of 1500 g is better written as 1.50 × 10³ g if it was measured to the nearest 10 g. 2 marks

    Show a model answer

    1500 g could have 2, 3 or 4 significant figures, so it doesn’t show how precisely the mass was measured. 1.50 × 10³ g clearly has 3 significant figures, which matches a measurement to the nearest 10 g.

Questions students and parents ask

Do zeros count as significant figures?

It depends where they are. Zeros between non-zero digits count (2006 has 4). Leading zeros never count (0.0054 has 2). Zeros at the end count if there is a decimal point (0.0500 has 3).

How many significant figures should my final answer have?

For multiplying and dividing, the same number as the least precise value you used. For adding and subtracting, the same number of decimal places as the least precise value.

Are significant figures the same as decimal places?

No. 0.0054 has 4 decimal places but only 2 significant figures. Decimal places count digits after the point; significant figures start at the first non-zero digit.

Does 100 have 1 or 3 significant figures?

You can’t tell from 100 alone. Write 1 × 10² for one significant figure or 1.00 × 10² for three.

Keep going